SZNK-NERUD

instruction manual.

Primary cable with Schuko plug 2,0m.

Faults check control during switching on.

Отзывы

Delivered with torch EP15 and MIG - MAG NO GAS wire feed roller 0,6 - 0,8 / 0,9mm

11 preset programs allow the operator to weld all types of the most common metals such as: Aluminium-Silicium, Aluminium-Magnesium, mild steel, galvanized steel, stainless steel, high tensile steel and self-shielded wire welding without protective gas for steel. 1 manual program all wires and diameters.

Installation Power (Kw):4,5 @ 60%

Overload protection.

Alimentation (volt 50/60 Hz):1 Ph x 230

Self shielded wire (mild teel) (Ø mm):(Synergic programs 0,9) - (Manual program 0,9)

Trolley (optional) usefull to carry the equipment together with its gas bottle and all its accessories.

Сравнить с другими товарами

Fuse (Amp):20

CuSi - CuAl wire:(Synergic programs 0,8) - (Manual program 0,8 - 1,0)

Correct input voltage.

Stainless steel wire (Ø mm):(Synergic programs 0,8) - (Manual program 0,8 - 1,0)

Synergic regulation of welding current necessary for metal smelting. Wire regulation in manual setting

Welding programs:11 Synergic + 1 Manual

Покупка/Доставка/Гарантия FeaturesMIG MAG compact wire feed welder Inverter SynergicSYNERGIC INVERTER TECHNOLOGY

Supplied with

Continuous regulation of electronic inductor: it allows, maintaining the same welding current, to change welding penetration and to considerably reduce spatters.

Duty Cycle (%):(170 @ 30%) -(150 @ 60%) -(135 @ 100%)

Synergy, controlled by a powerful microprocessor, thanks to the wire speed change, automatically sets the welding parameters. The operator shall only select metal and and wire diameter. Synergy may be cut out (manual setting) in order to freely manage all welding parameters.

Fine welding current regulation (+ / - 20%) set by synergy. Welding currente regulation in manual setting.

Описание

Aluminiumn Mg - Si wire (Ø mm):(Synergic programs 0,8 - 1,0) - (Manual program 0,8 - 1,0)

Peso (Kg):18

Wire Suitable Spool:Ø mm 100 - 200 (standard)

Welding current range:15 - 170

Dimensions (mm):430 x 270 x 430

Open circuit voltage (Volt):45

Steel wire (Ø mm):(Synergic programs 0,6 - 0,8) -(Manual program 0,6 - 0,8 - 1,0)

Timer for one side welding on overlapped metal sheets

Фотографии товара

AMP and inductor settings can be adjusted even during welding operations.