SZNK-NERUD

Spool gun torch with synergy regulation device on handle, necessary for Silicium (Si)/Magnesium (Mg) - aluminium wires

Stainless steel wire (Ø mm):(Synergic programs 0,8) - (Manual program 0,8 - 1,0)

Отзывы

Fine welding current regulation (+ / - 20%) set by synergy. Welding currente regulation in manual setting.

Steel wire (Ø mm):(Synergic programs 0,6 - 0,8) -(Manual program 0,6 - 0,8 - 1,0)

Delivered with torch EP15 and MIG - MAG NO GAS wire feed roller 0,6 - 0,8 / 0,9mm

11 preset programs allow the operator to weld all types of the most common metals such as: Aluminium-Silicium, Aluminium-Magnesium, mild steel, galvanized steel, stainless steel, high tensile steel and self-shielded wire welding without protective gas for steel. 1 manual program all wires and diameters.

AMP and inductor settings can be adjusted even during welding operations.

Trolley (optional) usefull to carry the equipment together with its gas bottle and all its accessories.

Overload protection.

Alimentation (volt 50/60 Hz):1 Ph x 230

Current input voltage.

Fuse (Amp):20

Покупка/Доставка/Гарантия MIG MAG compact wire feed welder Inverter SynergicSYNERGIC INVERTER TECHNOLOGY

Фотографии товара

Faults check control during switching on.

Welding programs:11 Synergic + 1 Manual

Wire Suitable Spool:Ø mm 100 - 200 (standard)

Primary cable with Schuko plug 2,0m.

Supplied with

Peso (Kg):18

Continuous regulation of electronic inductor: it allows, maintaining the same welding current, to change welding penetration and to considerably reduce spatters.

CuSi - CuAl wire:(Synergic programs 0,8) - (Manual program 0,8 - 1,0)

Synergic regulation of welding current necessary for metal smelting. Wire regulation in manual setting

Torch with synergy regulation device on handle, suggested for CuSi3 brazing and welding wire to weld galvanized metal sheets

Open circuit voltage (Volt):45

Описание

Welding current range:15 - 190

Duty Cycle (%):(190 @ 25%) -(160 @ 60%) -(145 @ 100%)

Dimensions (mm):430 x 270 x 430

Timer for one side welding on overlapped metal sheets

Self shielded wire (mild teel) (Ø mm):(Synergic programs 0,9) - (Manual program 0,9)

Standard torch suggested for solid steel welding wires, titanium steel wires, stainless steel wires and self-shielded no gas wires.

Сравнить с другими товарами

Synergy, controlled by a powerful microprocessor, thanks to the wire speed change, automatically sets the welding parameters. The operator shall only select metal and and wire diameter. Synergy may be cut out (manual setting) in order to freely manage all welding parameters.

Aluminiumn Mg - Si wire (Ø mm):(Synergic programs 0,8 - 1,0) - (Manual program 0,8 - 1,0)

Three different types of torch with Euro connection:

Installation Power (Kw):4,5 @ 60%

instruction manual.